At the 15-300 exposition, JAC Motors will present 7 models, including the well-known commercial vehicles JAC T6, JAC N 35, JAC N90, JAC N120 with special superstructures in demand in the construction sector, as well as novelties on the Russian market, among which will be the medium-tonnage commercial vehicle JAC N200, the four-axle dump truck JAC N450 and the concrete mixer truck on based on the JAC N350 chassis.
The youngest representative of the commercial line of the N-series, JAC N35, will be presented by the company in a new role – with an on-board platform and a Fassi CMU. The body with dimensions of 4200x1800x400 mm is installed by the company "New Plant". During the installation of the superstructure, the wheelbase was lengthened to 3140 mm as part of the preservation of the official warranty. A light truck with a gross weight of 3490 kg is able to take on board up to 1 ton of cargo.
The medium-duty JAC N90S with a permissible gross weight of 9030 kg will be shown in the version of the autofuel tanker manufactured by Rustrak and Nefaz. The two-section tank with a nominal capacity of 5200 liters is based on a short-wheelbase chassis with a distance between the axles of 3365 mm. The pumping equipment is mounted on the machine, driven by an engine through a power take-off box using a gimbal transmission.
JAC N90
The JAC N120S will be demonstrated in a variant with a dump truck body of the "scoop" type with high sides. The machine was prepared by the well-known company "Chaika-service". The body with a volume of 10 m3 has internal dimensions of 4000 x 2200x1200mm. The dump truck is designed to carry up to 6300 kg of cargo, the overall length is 6650 mm.
JAC N120
The heavy truck JAC N350 with a gross weight of 35 tons with a 6x4 wheel formula will be shown in a modification of the concrete mixer truck. The chassis and the special superstructure are completely made in China.
The Russian premiere of JAC Motors in 2022 will be the heavy dump truck JAC N450. The machine has a common base with the model N350, but differs in a four-axle design with a wheel formula of 8x4 and a permissible gross weight of up to 45,000 kg.
JAC N350
Another novelty is the medium–duty chassis JAC N200 with a load capacity of 7900-8030 kg. The machine has a permissible gross weight of up to 19,980 kg and is equipped with a 6.7-liter engine with a capacity of 180 hp. The chassis will be offered with three wheelbase options and a cabin with a berth. The NEC N200 will be demonstrated at the company's stand in a version with an onboard aluminum platform and a CMU manufactured by XCMG.
The exhibition is completed by a JAC T6 pickup truck equipped with equipment for providing mobile technical assistance. Representatives of JAC Motors will be happy to wait for all visitors of the exhibition at their booth.
E-mail
Twitter
Facebook
LinkedIn